Tune Up Kit Fits Case/International Harvester Replaces 0201-4656B

One New Aftermarket Tune Up Kit

Tech Info:
-Kit Contains:
-(1) Magneto Rotor
-Fits IHC J4 magneto
-Replaces Part Number: 351692R91
–
-(1) Magneto Point Set
-Point Gap = 0.013″
-Replaces Part Number(s):
-353172R91, 407018R91
–
-(1) Ignition Condenser
-Fits 1951-62 Distributors.
-Fits J4 Magneto.
-For Serial Numbers 81411 & Up.
-Replaces Part Number(s):
-251539R91, 353903R91, 353903R92, 353905R1, 354136R92
–
-(1) Distributor Cap
-Clip Style Cap
-Replaces Part Number(s):
-0201-4656B, 21A461, 351693R1, 351693R92
–
-(4) Spark Plugs
-Standard Info
-Thread Size: 18mm
-7/8″ Hex Shoulder
-Hex Size: 13/16″ (20.6mm)
-Reach: 12mm (.472″)
-Seat Type: Gasket
-Gap: .028″ (0.7mm)
-Heat Range: 2
-Terminal Type: Removable Nut
-Resistor: No
-Thread Pitch: 1.5mm
-Center Electrode
-Type: Standard
-Material: Nickel
-Size: 2.5mm
-Projection: Non-Projected
-Ground Electrode
-Type: Standard
-Material: Nickel
-Replaces Part Number(s):
-G44840, 4012405C
–
-(1) Spark Plug Wiring Set (W/ 90 degree boots)
-ALL 4-CYL (1939-1964)
-Wire Dimensions:
-Wire Diameter: 1/4”
-With Cap: 5/8”
-Length: 30”
-Cap Dimensions:
-Length: 1 3/8”
-Diameter: 3/4
-Metal Pieces:
-Length: 3/4”
-Width: 1/4”
-Height: 1/2”
-Replaces Part Numbers: 66442, 9N12259B, S66442

Made to Fit Case/International Harvester:
Tractor Models: Cub, Cub-Lo Boy
Replaces Part Number(s): 351692R91, 251539R91, 353903R91, 353903R92, 353905R1, 354136R92, 0201-4656B, 21A461, 351693R1, 351693R92, 353172R91, 407018R91

Models This Part Fits:

Cub, Cub LoboyAdditional Information: Kit Contains:(1) Magneto RotorFits IHC J4 magnetoReplaces Part Number: 351692R91(1) Magneto Point SetPoint Gap = 0.013″Replaces Part Number(s):353172R91, 407018R91(1) Ignition CondenserFits 1951-62 Distributors. Fits J4 Magneto. For Serial Numbers 81411 & Up.Replaces Part Number(s): 251539R91, 353903R91, 353903R92, 353905R1, 354136R92(1) Distributor Cap Clip Style CapReplaces Part Number(s):0201-4656B, 21A461, 351693R1, 351693R92(4) Spark PlugsStandard InfoThread Size: 18mm7/8″ Hex ShoulderHex Size: 13/16″ (20.6mm)Reach: 12mm (.472″)Seat Type: GasketGap: .028″ (0.7mm)Heat Range: 2Terminal Type: Removable NutResistor: NoThread Pitch: 1.5mmCenter ElectrodeType: StandardMaterial: NickelSize: 2.5mmProjection: Non-ProjectedGround ElectrodeType: StandardMaterial: NickelReplaces Part Number(s):G44840, 4012405C(1) Spark Plug Wiring Set (W/ 90 degree boots)ALL 4-CYL (1939-1964)Wire Dimensions:Wire Diameter: 1/4”With Cap: 5/8”Length: 30”Cap Dimensions:Length: 1 3/8”Diameter: 3/4Metal Pieces:Length: 3/4”Width: 1/4”Height: 1/2”Replaces Part Numbers: 66442, 9N12259B, S66442