Tune Up Kit Fits John Deere Replaces 1900119

One New Aftermarket Tune Up Kit

Tech Info:
-(1) Spark Plug Wiring Set
-90 Degree Boots
-Wires Are Approximately 32″ and 49″ Long
-Copper Core
-Aluminum Coating to Prevent Corrosion
-Neoprene Outer Cover
-Each Spark Plug Wire Has One End Pre-Assembled – Crimp the Other End With a Crimping Tool
-Coil Wire is the Excess Wire Left Over From the Spark Plug Wire
–
-(1) Distributor Cap
-2 Cylinder Vertical
-Clip Type
–
-(1) Tune-Up Kit
-Contains: Breaker Points, Condenser, and Rotor.
-Replaces Part Number: ATK1DCR
–
-(2) Spark Plug
-7/8″ – 18 Thread Diameter
-5/8″ Reach
-15/16″ Hex
-Cold Heat Range
-Standard Tip / Non-Resistor
-Replaces Part Number: AL3076
–
-(1) Distributor Dust Cover
-Includes Felt gasket, Washer, Ruber seal
-Please Note: Fits Delco Distributors with Clip-On Cap Only
-Replaces Part Number: 1900119
–
-(1) Distributor Cap
-Brass contacts
-PBT Plastic
-Replaces Part Number: 811735
–
-(1) Economy Carburetor Kit
-Needle and 0.080″ Float Valve Seat
-Idle Adjust Needle and Spring
-Float Lever Pin
-Gaskets
-Seals
-Instructions
-Replaces Part Number(s):
-AL20225T, AL20290T, AL2283T, AL2630T, AL2848T, AL2849T, AL2850T, AL2851T, AL2859T, AL2958T, AT11963T, AT12743T, AT12903T, AT16332T, PP21819
–
-(1) Carburetor Float
-For Small Bowl Marvel Schebler Carbs
-The Dimension from Center of Pin Hinge to End of Pontoon Is 2.375″ in Length
-Replaces Part Number(s):
-AL20225T, AL20290T, AL2283T, AL2630T, AL2848T, AL2849T, AL2850T, AL2851T, AL2859T, AT11963T, AT12743T, AT12903, AT16332T, PP21819
–
-(1) Engine Oil Filter
-4-1/8″ length
-3-5/16″ Outer Diameter
-1.095″ center stud hole diameter
-Cartridge type filter
-Replaces Part Number(s): AH1082R, AH812R

Made to Fit John Deere:
Tractor Models: 320, 330, 40, 420, 430
Replaces Part Number(s): AL20225T, AL20290T, AL2283T, AL2630T, AL2848T, AL2849T, AL2850T, AL2851T, AL2859T, AT11963T, AT12743T, AT12903, AT16332T, PP21819, AH1082R, AH812R, ATK1DCR, AL3076, 1900119, 811735, AL20225T, AL20290T, AL2283T, AL2630T, AL2848T, AL2849T, AL2850T, AL2851T, AL2859T, AL2958T, AT11963T, AT12743T, AT12903T, AT16332T, PP21819
Additional Information: (1) Spark Plug Wiring Set90 Degree BootsWires Are Approximately 32″ and 49″ LongCopper CoreAluminum Coating to Prevent CorrosionNeoprene Outer CoverEach Spark Plug Wire Has One End Pre-Assembled – Crimp the Other End With a Crimping ToolCoil Wire is the Excess Wire Left Over From the Spark Plug Wire(1) Distributor Cap2 Cylinder VerticalClip Type(1) Tune-Up KitContains: Breaker Points, Condenser, and Rotor.Replaces Part Number: ATK1DCR(2) Spark Plug7/8″ – 18 Thread Diameter5/8″ Reach15/16″ HexCold Heat RangeStandard Tip / Non-ResistorReplaces Part Number: AL3076(1) Distributor Dust CoverIncludes Felt gasket, Washer, Ruber sealPlease Note: Fits Delco Distributors with Clip-On Cap OnlyReplaces Part Number: 1900119(1) Distributor CapBrass contactsPBT PlasticReplaces Part Number: 811735(1) Economy Carburetor KitNeedle and 0.080″ Float Valve SeatIdle Adjust Needle and SpringFloat Lever PinGasketsSealsInstructionsReplaces Part Number(s):AL20225T, AL20290T, AL2283T, AL2630T, AL2848T, AL2849T, AL2850T, AL2851T, AL2859T, AL2958T, AT11963T, AT12743T, AT12903T, AT16332T, PP21819(1) Carburetor FloatFor Small Bowl Marvel Schebler CarbsThe Dimension from Center of Pin Hinge to End of Pontoon Is 2.375″ in LengthReplaces Part Number(s):AL20225T, AL20290T, AL2283T, AL2630T, AL2848T, AL2849T, AL2850T, AL2851T, AL2859T, AT11963T, AT12743T, AT12903, AT16332T, PP21819(1) Engine Oil Filter4-1/8″ length3-5/16″ Outer Diameter1.095″ center stud hole diameterCartridge type filterReplaces Part Number(s): AH1082R, AH812R